ASTM A234 WP9 Stub End suppliers

These ASTM A234 WP9 Stub End Fittings are used in lines that might require a quick-disconnect system. They are also used to facilitate lining up the bolt holes of flanges when there flanges are now welded or fastened to the pipe.

. Normally, ASTM A234 WP9 stub ends are installed in pairs, the paired fittings mating with two lap joint flanges. This allows wasy opening of the line for future cleaning and inspection and if the line requires replacement, the flanges can be reused because they are not fastened to the system. They ride freely in the outside of the pipe. ASTM A234 WP9 Lap joint stub ends are made with serrated gasket surfaces for improved sealing of the connection and prevention of leakage at the joint. This surface has replaced the raised gasket surface of a flange.

Alloy Steel Pipe Fitting Stub End

Materials: ASTM A234/ ASME SA234 WPB WP9, Wp9, WP11, WP12, WP22 & WP91 ASTM A234 WP9 Stub Ends End Prep: 1. Beveled Ends 2. Squared Ends 3. Flanged Ends 4. Victaulic Grooves 5. Threaded Ends (Male Only)


ASTM A234 WP9 Stub End Fittings Specifications
Grade Specifications Chrome Moly Grades P1, P5, P9, P11, P22, P91
Specification ASTM/ ASME A/SA234 WP1, WP9, WP9, WP11, WP22, WP91
Type Seamless / Welded / Fabricated / Forged
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Range ½" NB to 48″ NB in Sch 10s, 40s, 80s, 160s, XXS.
Dimensions ANSI/ASME B16.9, B16.28, MSS-SP-43.
Applicable Standards 1-ASME B 16.9 for large Bore
2-ASME B 16.11 for small Bore (socket welded)
3-ASME B 16.25 for butt weld ends
4-ASME B 16.28 for small radius elbow
End Prep:
  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Cut Grooves
  • Victaulic Grooves
  • Threaded Ends (Male & Female)

  • ASTM A234 WP9 Stub End Fittings Chemical Composition
    Grade C Mn Si S P Cr Mo
    A234 WP9 ≤0.15 ≤0.6 ≤0.5 ≤0.04 ≤0.03 4-6 0.44-0.65

    ASTM A234 WP9 Stub End Fittings Mechanical Properties
    Grade Tensile Strength (Mpa) Yield Strength (Mpa) Elongation %
    A234 WP9 415 – 585 ≥205 ≥20

    Export Destination of Alloy Steel Pipe Fitting ASTM A234 WP9 Stub End

    Metallica Metals India have exported Alloy Steel Pipe Fittings ASTM A234 WP9 Stub Endto over 60 countries including Sudan,UAE, UK, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, Brazi, Netherlands, Germany, Italy, Spain, Serbia, Kuwait, Peru, Nigeria, Poland, South Africa, Denmark, Turkey, Egypt, Venezuela, Kuwait, Madagascar, Angloa & Srilanka.


    For any enquiries related to Alloy Steel Pipe Fittings ASTM A234 WP9 Stub End, kindly contact us on :-
    +91-2242 5140 / 5942       info@metallicametals.com


    OUR SUMMARY:
    Reviewer
    Metallica Metals India
    Review Date
    Reviewed Product
    Alloy Steel Pipe Fitting ASTM A234 WP9 Stub End
    Author Rating
    5Alloy K500 Screwed Threaded Cap ManufacturerAlloy K500 Screwed Threaded Cap ManufacturerAlloy K500 Screwed Threaded Cap ManufacturerAlloy K500 Screwed Threaded Cap ManufacturerAlloy K500 Screwed Threaded Cap Manufacturer