ASTM A234 WP5 45 Degree Elbows suppliers

ASTM A234 WP5 45 degree elbow is the Alloy Steel elbow which can change the flow direction in a 45 degree. As a joint, it is used between the two pipes which has this right angle. ASTM A234 WP5 45° Elbows are made of Alloy Steel seamless tubes within the diameter range of DN 15 – DN 1000.

The ASTM A234 WP5 45 degree butt weld elbow is a pipe fitting that is attached to two pieces of pipe to allow a change in direction. ASTM A234 WP5 butt weld elbows can come in various degrees of angles and schedules. The most common angles available are 45 degree elbows and 90 degree elbows. ASTM A234 WP5 90 degree elbows are available in long radius and short radius. The schedule corresponds to the wall thickness of the pipe.

Alloy Steel Pipe Fitting 45Deg Elbow

The function of a pipe is to carry gasses or fluids under pressure. Therefore, the ID, or internal diameter of the ASTM A234 WP5 butt weld elbow is a major dimension of the pipe. A pipe's outside diameter (OD) remains comparatively constant for all pipe sizes. It is the inside diameter's (ID) bore size that is reduced as the schedule or wall thickness increases.


ASTM A234 WP5 Elbow 45° Fittings Specifications
Grade Specifications Chrome Moly Grades P1, P5, P9, P11, P22, P91
Specification ASTM/ ASME A/SA234 WP1, WP5, WP9, WP11, WP22, WP91
Type Seamless / Welded / Fabricated / Forged
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Range ½" NB to 48″ NB in Sch 10s, 40s, 80s, 160s, XXS.
Dimensions ANSI/ASME B16.9, B16.28, MSS-SP-43.
Applicable Standards 1-ASME B 16.9 for large Bore
2-ASME B 16.11 for small Bore (socket welded)
3-ASME B 16.25 for butt weld ends
4-ASME B 16.28 for small radius elbow
End Prep:
  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Cut Grooves
  • Victaulic Grooves
  • Threaded Ends (Male & Female)

  • ASTM A234 WP5 Elbow 45° Fittings Chemical Composition
    Grade C Mn Si S P Cr Mo
    A234 WP5 ≤0.15 ≤0.6 ≤0.5 ≤0.04 ≤0.03 4-6 0.44-0.65

    ASTM A234 WP5 Elbow 45° Fittings Mechanical Properties
    Grade Tensile Strength (Mpa) Yield Strength (Mpa) Elongation %
    A234 WP5 415 – 585 ≥205 ≥20

    Export Destination of Alloy Steel Pipe Fitting ASTM A234 WP5 45 Degree Elbows

    Metallica Metals India have exported Alloy Steel Pipe Fittings ASTM A234 WP5 45 Degree Elbows to over 60 countries including Sudan,UAE, UK, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, Brazi, Netherlands, Germany, Italy, Spain, Serbia, Kuwait, Peru, Nigeria, Poland, South Africa, Denmark, Turkey, Egypt, Venezuela, Kuwait, Madagascar, Angloa & Srilanka.


    For any enquiries related to Alloy Steel Pipe Fittings ASTM A234 WP5 45 Degree Elbows, kindly contact us on :-
    +91-2242 5140 / 5942       info@metallicametals.com


    OUR SUMMARY:
    Reviewer
    Metallica Metals India
    Review Date
    Reviewed Product
    Alloy Steel Pipe Fitting ASTM A234 WP5 45 Degree Elbows
    Author Rating
    5Alloy K500 Screwed Threaded Cap ManufacturerAlloy K500 Screwed Threaded Cap ManufacturerAlloy K500 Screwed Threaded Cap ManufacturerAlloy K500 Screwed Threaded Cap ManufacturerAlloy K500 Screwed Threaded Cap Manufacturer