Alloy Steel Buttweld Stub End suppliers

These Alloy Steel Buttweld fittings are used in lines that might require a quick-disconnect system. They are also used to facilitate lining up the bolt holes of flanges when there flanges are now welded or fastened to the pipe.

. Normally, Alloy Steel Buttweld stub ends are installed in pairs, the paired fittings mating with two lap joint flanges. This allows wasy opening of the line for future cleaning and inspection and if the line requires replacement, the flanges can be reused because they are not fastened to the system. They ride freely in the outside of the pipe. Alloy Steel Buttweld Lap joint stub ends are made with serrated gasket surfaces for improved sealing of the connection and prevention of leakage at the joint. This surface has replaced the raised gasket surface of a flange.

Alloy Steel Buttweld Stub End

Materials: ASTM A234/ ASME SA234 WPB WP5, Wp9, WP11, WP12, WP22 & WP91 Alloy Steel Buttweld Stub Ends End Prep: 1. Beveled Ends 2. Squared Ends 3. Flanged Ends 4. Victaulic Grooves 5. Threaded Ends (Male Only)


Alloy Steel Buttweld Stub End Fittings Specifications
Grade Specifications Chrome Moly Grades P1, P5, P9, P11, P22, P91
Specification ASTM/ ASME A/SA234 WP1, WP5, WP9, WP11, WP22, WP91
Type Seamless / Welded / Fabricated / Forged
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Range ½" NB to 48″ NB in Sch 10s, 40s, 80s, 160s, XXS.
Dimensions ANSI/ASME B16.9, B16.28, MSS-SP-43.
Applicable Standards 1-ASME B 16.9 for large Bore
2-ASME B 16.11 for small Bore (socket welded)
3-ASME B 16.25 for butt weld ends
4-ASME B 16.28 for small radius elbow
End Prep:
  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Cut Grooves
  • Victaulic Grooves
  • Threaded Ends (Male & Female)

  • Alloy Steel Buttweld Stub End Fittings Chemical Composition
    Grade C Mn Si S P Cr Mo
    A234 WP5 ≤0.15 ≤0.6 ≤0.5 ≤0.04 ≤0.03 4-6 0.44-0.65

    Alloy Steel Buttweld Stub End Fittings Mechanical Properties
    Grade Tensile Strength (Mpa) Yield Strength (Mpa) Elongation %
    A234 WP5 415 – 585 ≥205 ≥20

    Export Destination of Alloy Steel Pipe Fitting Alloy Steel Buttweld Stub End

    Metallica Metals India have exported Alloy Steel Pipe Fittings Alloy Steel Buttweld Stub Endto over 60 countries including Sudan,UAE, UK, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, Brazi, Netherlands, Germany, Italy, Spain, Serbia, Kuwait, Peru, Nigeria, Poland, South Africa, Denmark, Turkey, Egypt, Venezuela, Kuwait, Madagascar, Angloa & Srilanka.


    For any enquiries related to Alloy Steel Pipe Fittings Alloy Steel Buttweld Stub End, kindly contact us on :-
    +91-2242 5140 / 5942       info@metallicametals.com


    OUR SUMMARY:
    Reviewer
    Metallica Metals India
    Review Date
    Reviewed Product
    Alloy Steel Pipe Fitting Buttweld Stub End
    Author Rating
    5Alloy K500 Screwed Threaded Cap ManufacturerAlloy K500 Screwed Threaded Cap ManufacturerAlloy K500 Screwed Threaded Cap ManufacturerAlloy K500 Screwed Threaded Cap ManufacturerAlloy K500 Screwed Threaded Cap Manufacturer